|

DENARE WATERPROOFING TECHNOLOGIES AUSTRALIA
REPAIR PRODUCTS & EQUIPMENT
ISO-DRAIN™
10 Geo

Studded
drainage sheet
ISO-DRAIN™ 10 Geo is
a studded drainage sheet that provides effective drainage and waterproof
membrane protection on foundation walls and other underground structures.
The welded-on non-woven geotextile covering the dimples prevents
soil particles blocking the drainage sheet, creates an air gap for
reliable ventilation and allows inflow and transport of water from
surrounding soil.
ISO-DRAIN™ 10 Geo with
its special stud structure rapidly captures and transport high water
volumes and effectively resists high loads from earth and formwork.
ISO-DRAIN™ 10 Geo is installed with the geotextile facing
the backfill and can be used at depths of up to 10 metres.
APPLICATIONS: Typical
areas of application include:
- Retaining and basement walls.
- Tunnels and landfills.
- Paved areas.
- Roof gardens and landscaped decks.
ADVANTAGES:
- Provides an efficient drainage
system on underground structures.
- Acts as a protection layer over
waterproofing membranes.
- Creates a vapour and heat insulation
barrier adjacent to waterproofing membranes.
- High compressive strength of 400
kN/mm² (40 t/m²) permits usage in high weight bearing load
situations.
- Easy to handle rolls results in
rapid and low cost installation.
SPECIFICATIONS
|
Studded sheet:
|
High density polyethylene
|
|
Geotextile:
|
Polypropylene
|
|
Colour:
|
Black
|
|
Weight:
|
approx. 750 g/m²
|
|
Studded sheet thickness:
|
approx. 0.6 mm
|
|
Stud height:
|
10 mm
|
|
Void volume between studs:
|
approx. 7.9 l/m²
|
|
Drainage capacity:
|
approx. 4.8 l/s.m approx. 288 l/min.m
|
|
Geotextile weight:
|
136 g/m²
|
|
Geotextile water transmission:
|
approx. 100 l/s.m²
|
|
Compressive strength:
|
approx. 400 kN/m² (40 t/m²)
|
|
Service temperature:
|
-30ºC to 80ºC
|
|
Biological/chemical resistance:
|
Unaffected by a wide range of chemicals, resistant
to moulds, algae, bacteria and impervious to root penetration
|
|
Roll size:
|
2.0 m x 12.5 m
|

Statements made in this bulletin are for the assistance of our customers. They are based on
our experience and judgement but must not be regarded as amounting to a legal warranty or as involving any liability
on our part
Back to Repair Products & Equipment index

   


|