DENARE WATERPROOFING TECHNOLOGIES AUSTRALIA
DENARE
TORCH-ON MEMBRANES
ANTIRADICE
P & E
Root resistant.
DESCRIPTION:
ANTIRADICE
P is a high performance prefabricated waterproof plastomeric
membrane. It is made of a compound based on distilled bitumen modified
with POLYPROPYLENE and reinforcement in non-woven SPUNBOND
polyester. The compound also contains PREVENTOL B2 by BAYER,
a product which acts as a chemical barrier to prevent the membrane
being perforated by vegetation. ANTIRADICE is also available
with the elastomeric compound version, ANTIRADICE E, keeping
the same anti-roots characteristics. The underside of ANTIRADICE
is protected by POLYFLAM, the special non-stick polyethylene
film which melts upon torching.
APPLICATION:
ANTIRADICE
is a membrane with specific characteristics, to be used as a barrier
against penetration by plant roots.
METHOD
OF APPLICATION:
The product is torched on with
a minimal propane gas flame.
COLD FLEXIBILITY:
-10ºC:
P version (APP)
-20ºC: E version (SBS)
TECHNICAL DATA:
|
|
Antiradice P |
Antiradice E |
|
Thermal dimensional stability (ºC) |
+120 |
+100 |
|
Cold flexibility (ºC) |
-10 |
-20 |
|
Tensile strength (N/5cm) |
Long: 920 Trans: 565 |
Long: 920 Trans: 565 |
|
Elongation at break (%) |
Long: 50 Trans: 50 |
Long: 50 Trans: 50 |
ELASTOBOND
S6
Extreme flexibility.
DESCRIPTION:
High
performance prefabricated waterproof elastomeric membranes consisting
of a compound based on distilled bitumen, highly resilient elastomeric
(thermoplastic) resin (SBS) and reinforcement in non-woven polyester.
ELASTOBOND S6 comes supplied with both surfaces covered by
POLYFLAM, the special non-stick polythylene film which melts upon
torching, in the MINERAL version the top surface is protected by
a uniform layer of natural or coloured* slate chippings and has
a selvedge along one edge for overlapping.
APPLICATION:
The
exceptional resilience of the membranes, thanks to the polymer SBS,
make ELASTOBOND S6 and MINERAL ELASTOBOND S6, particularly
suitable for waterpoofing structures (metal, prefabricated, flat,
curved or sawtooth roofs, etc) subject to cyclic movements or considerable
dimensional variations.
METHOD OF
APPLICATION:
The product is torched on with a
minimal propane gas flame.
AVAILABLE COLOURS:
*
Slate grey, green, red, white, dark brown
COLD FLEXIBILITY:
<-15ºC
TECHNICAL DATA:
|
Elastobond S6 |
Elastobond V |
|
|
Thermal dimensional stability (ºC) |
+90 |
+90 |
|
Cold flexibility (ºC) |
<-15 |
<-15 |
|
Tensile strength (N/5cm) |
Long: 860 Trans: 560 |
Long: 360 Trans: 215 |
|
Elongation at break (%) |
Long: 50 Trans: 50 |
Long: 2 Trans: 2 |
Statements made in this bulletin are for the assistance of our customers. They are based on our experience and judgement but must not be regarded as amounting to a legal warranty or as involving any liability on our part
